 |
|
ROBA-stop-M
The robust, cost effective motor brake.
Maintenance free (no re-adjustments necessary)
Easy installation
Completely enclosed brake housing in Protection IP54 or IP65
Insulation material class F
Can be used for 100% duty cycle
Short switching times
Designs:
ROBA-stop-M standard brake
As a working brake, this brake brakes during motion and positions itself at the required point.
ROBA-stop-M holding brake
Holds drives safely in position during downtimes and brakes during motion on EMERGENCY STOP.
  |
 |
|
|
|
ROBA-topstop with shaft design
Modular safety brake system for A bearing side servomotor attachment.
Secure holding of the axis in any position, even with de-installed servomotor, for example during machine maintenance
The perfect brake system for vertical axes and for handling large weights
Long service lifetime, even with frequent EMERGENCY STOP braking actions
Monitoring of the operating condition via integrated switch
Short, compact design
Low dead weight
Low self heating, even at 100% duty cycle
|
 |
|
|
ROBA-linearstop
Holding brake
Reliable device for clamping and holding high
High performance density
Suitable for EMERGENCY STOP braking actions
Closed spring loaded
Opened pneumatically, hydraulically or electromagnetically
Integrated switching condition monitoring possible
Clearing the clamp is not necessary
Nominal holding force (hydraulic): 10 to 50kN
Nominal holding force (pneumatic): 0.5 to 40kN
Nominal holding force (electrical): 0.18 to 17.5kN
|
 |
|
|
ROBA-stop-silenzio
The quietest safety brake for elevator and stage drives.
Dual circuit brake as redundant brake system with very short constructional length
Installation of micro switches for function monitoring possible
Simplest possible installation
No air gap adjustment necessary
Consistently low noise level for several hundred thousand switching actions
|
 |
|
|
ROBA-stop-S
Waterproof, robust monoblock brake.
Completely enclosed and sealed design in Protection IP67
Robust, one piece monoblock housing
All components are corrosion resistant
High friction work permitted
Can be used in extreme ambient conditions
Remote diagnosis due to integration of release and wear monitoring
Anti-condensation heating to prevent condensate precipitation in the brake interior
|
 |
|
|
ROBA-stop-Universal
Multi-function all-round safety brake.
Sensitive braking torque adjustment
Easy wear re-adjustment
Designs as positioning brake, holding brake, tacho brake and peak load brake
Enclosed design
Easy installation
Insulation material class F
Can be used for 100 % duty cycle
Short switching times
|
 |
|
|
ROBA-servostop
Safety brake for servomotors.
Extremely low mass moment of inertia
Easy and safe installation without complicated and time consuming adjustment work
Resistant against voltage fluctuations
Resistant against temperature expansion; can also be used B bearing side without restrictions
High permitted friction work
|
 |
|
|
